Using a low-res monitor

[svenderik]

Hi
I want to use the Rho-board with an old monitor with less than HD-resolution. But the monitor says "Out of range" Is it not possible to do that?
Best regards
Svend Erik

[Admin]

Hi Svend
We have only tested from 720p - "HD Ready" resolutions and PAL on the CVBS output.
It's possible the board does not properly detect the EDID information from the TV screen (metadata about available resolutions) or that the EDID is missing or buggy.
Please try setting up a lower resolution on a TV that works and then switching to your other monitor.